Changing the blade on your Dewalt saw is a straightforward process that you can do in a few simple steps. Whether you’re a professional contractor or a DIY enthusiast, knowing how to change the blade on your saw is an essential skill that you must master. In this article, we’ll guide you through the steps you need to take to change the blade on your Dewalt saw.
Step 1: Unplug the saw
The first step in changing the blade on your Dewalt saw is to unplug it from the power source. This is important because it will ensure that you don’t accidentally turn on the saw while you’re changing the blade, which could be dangerous.
Step 2: Remove the blade guard
The next step is to remove the blade guard. The blade guard is a safety feature that protects you from the sharp blade, but it can also get in the way when you’re changing the blade. To remove the blade guard, you’ll need to loosen the screw that holds it in place and lift it off the saw.
Step 3: Loosen the blade bolt
Once you’ve removed the blade guard, you’ll need to loosen the blade bolt. The blade bolt is the nut that holds the blade in place. You’ll need to use a wrench to loosen the bolt. Turn the wrench counterclockwise to loosen the bolt. Be sure to hold the blade in place with your other hand to prevent it from spinning.
Step 4: Remove the old blade
After you’ve loosened the blade bolt, you can remove the old blade. Simply lift the blade off the saw and set it aside. Be sure to handle the blade carefully, as it will be sharp.
Step 5: Install the new blade
Once you’ve removed the old blade, you can install the new blade. Place the new blade onto the saw, making sure that the teeth are facing in the right direction. Then, tighten the blade bolt by turning the wrench clockwise. Be sure to hold the blade in place with your other hand to prevent it from spinning.
Step 6: Replace the blade guard
After you’ve installed the new blade, you can replace the blade guard. Simply slide the blade guard back onto the saw and tighten the screw that holds it in place.
Step 7: Test the saw
Finally, you’ll want to test the saw to make sure that the new blade is installed correctly. Plug the saw back in and turn it on. Listen for any unusual sounds or vibrations. If everything sounds and feels normal, you’re good to go.
Changing the blade on your Dewalt saw is a simple process that you can do in just a few steps. By following these steps, you’ll be able to change the blade on your saw quickly and safely, allowing you to get back to work in no time!
More to explore: Can A Hole Saw Be Used Without The Pilot Bit?
Frequently Asked Questions for How Do I Change The Blade On My Dewalt?
1. How often should I change the blade on my Dewalt tool?
Answer: The frequency of blade changes depends on the type of material you are cutting and the intensity of usage. However, Dewalt recommends changing blades every three to six months, even if they appear to be in good condition.
2. What tools do I need to change the blade on my Dewalt?
Answer: Changing the blade on a Dewalt tool requires only a few basic tools, including a screwdriver, an Allen wrench, and a pair of pliers.
3. How do I know when it is time to change the blade on my Dewalt?
Answer: Signs that it is time to change your Dewalt blade include dullness, chipping, or missing teeth, as well as difficulty making clean cuts or an increased risk of kickback. It is also important to monitor the blade for wear and tear, such as cracks or breaks, which can signal a need for replacement.
4. Can I change the blade on my Dewalt tool myself or should I take it to a professional?
Answer: Changing the blade on a Dewalt tool is a relatively simple process that can typically be done by the user. However, if you are unsure about how to change the blade or lack the necessary tools, it may be safer to take your tool to a professional for assistance.
Related article: How Do You Cut Thick Metal With A Circular Saw?