Hayward salt cell boards are an essential component of saltwater pools as they regulate the amount of chlorine in the water. The salt cell board is responsible for generating chlorine from the saltwater to keep the pool clean and safe for swimming. However, sometimes the board may malfunction, and it may be necessary to reset it. Resetting the salt cell board is a simple process that can be done in just a few steps. In this article, we will discuss how to reset a Hayward salt cell board.
Identify the Problem
Before resetting the salt cell board, it is essential to identify the problem. If the board is not functioning correctly, it could be due to a dirty cell, low salt levels, or a faulty power supply. It is important to check the cell for debris and clean it if necessary. Check the salt levels in the pool and add salt if needed. If these steps do not solve the problem, it may be necessary to reset the board.
Steps to Reset a Hayward Salt Cell Board
Step 1: Turn off the Power
The first step in resetting the salt cell board is to turn off the power. Locate the circuit breaker that controls the power to the pool equipment and turn it off.
Step 2: Remove the Cell
Once the power is off, remove the salt cell from the plumbing. It is important to follow the manufacturer’s instructions for removing the cell to avoid damaging it.
Step 3: Clean the Cell
Inspect the cell for debris and clean it if necessary. Use a high-pressure hose to remove any built-up debris from the cell. If the cell is heavily scaled, it may need to be soaked in a cleaning solution.
Step 4: Reset the Board
After cleaning the cell, it is time to reset the board. Locate the control panel for the salt cell board and press the reset button. Hold the button down for about three seconds and release it. The board should now be reset.
Step 5: Reinstall the Cell
Once the board is reset, it is time to reinstall the cell. Follow the manufacturer’s instructions for reinstalling the cell to avoid damaging it.
Step 6: Turn on the Power
After reinstalling the cell, turn the power back on. Locate the circuit breaker that controls the power to the pool equipment and turn it back on.
Step 7: Monitor the System
After resetting the salt cell board, it is important to monitor the system to ensure it is functioning correctly. Check the salt levels in the pool regularly and clean the cell as needed to prevent future problems.
Conclusion
Resetting a Hayward salt cell board is a simple process that can be done in just a few steps. If the board is not functioning correctly, it may be due to a dirty cell, low salt levels, or a faulty power supply. Before resetting the board, it is important to identify the problem and try to solve it using other methods. If resetting the board does not solve the problem, it may be necessary to contact a professional for assistance. By following the steps outlined in this article, you can reset your Hayward salt cell board and keep your pool clean and safe for swimming.
More to explore: How To Replace Zodiac T5 Diaphragm?
Further reading: Why Is My Polaris Pool Cleaner Moving Slow?