How Do I Reset My Hayward Salt Cell Board?

Swimming pools are an excellent way to escape the scorching heat of summer. However, maintaining a pool can be a daunting task, especially when it comes to saltwater pools. Hayward salt cell board is a crucial component of the saltwater pool system, and it is responsible for converting salt into chlorine to keep the pool clean and sanitized. If you encounter any problem with your Hayward salt cell board, you can reset it to fix the issue. In this article, we will guide you on how to reset your Hayward salt cell board step by step.

What is a Hayward Salt Cell Board?

Before we dive into the resetting process, let’s first understand what a Hayward salt cell board is. A salt cell board is an essential part of a saltwater pool system that produces chlorine from salt. The saltwater passes through the salt cell board, where it gets electrolyzed, and chlorine is produced. The chlorine produced then sanitizes the pool, keeping it clean and free from harmful bacteria. A Hayward salt cell board is a popular and reliable choice for saltwater pool owners, and it comes with a user-friendly control panel.

Why do you need to reset the Hayward Salt Cell Board?

Resetting the Hayward salt cell board is necessary when you encounter any issues with the system. The most common problem is a low salt level or a high salt level, which can cause the system to stop working correctly. Another issue could be a dirty salt cell that is not producing enough chlorine. Resetting the salt cell board can help fix these problems, and it is a straightforward process that you can do on your own.

Steps to Reset the Hayward Salt Cell Board

Step 1: Turn off the Power

The first step to reset the Hayward salt cell board is to turn off the power. Locate the circuit breaker that powers your pool system and turn it off. This will ensure your safety while you work on the salt cell board.

Step 2: Remove the Salt Cell

Next, you need to remove the salt cell from the system. Locate the salt cell and unscrew it from the piping. Be careful not to damage the O-ring while removing the salt cell.

Step 3: Clean the Salt Cell

Once you have removed the salt cell, it is time to clean it. Use a high-pressure hose to remove any debris or buildup on the salt cell. You can also use a salt cell cleaning solution to ensure that the cell is clean and free from any dirt or mineral buildup.

Step 4: Reset the Salt Cell Board

After cleaning the salt cell, it’s time to reset the salt cell board. Locate the control panel of the Hayward salt cell board and press the “Diagnostic” button. Hold the button for three seconds until the screen displays “Inspect Cell” or “Clean Cell.”

Step 5: Reinstall the Salt Cell

Once you have reset the salt cell board, it’s time to reinstall the salt cell. Screw the salt cell back into the piping and make sure the O-ring is in place. Tighten the salt cell securely to prevent any leaks.

Step 6: Turn on the Power

Finally, it’s time to turn on the power. Locate the circuit breaker that powers your pool system and turn it on. Wait for a few minutes for the system to start up and check the salt cell board’s screen to ensure that it is working correctly.

Conclusion

Maintaining a saltwater pool can be challenging, but resetting the Hayward salt cell board is a straightforward process that can help fix any issues you encounter. By following the steps outlined in this article, you can reset the salt cell board and keep your pool clean and sanitized. Remember to always turn off the power before working on the salt cell board and follow the manufacturer’s instructions for best results.

You might be interested in: Why Is My Pool Always Cloudy After Vacuuming?

Frequently Asked Questions – How Do I Reset My Hayward Salt Cell Board?

What is a Hayward salt cell board?

A Hayward salt cell board is a device that works with a saltwater pool system to convert salt into chlorine. It is an essential component of the system and is responsible for maintaining the proper balance of salt and chlorine in your pool.

Why might I need to reset my Hayward salt cell board?

There are several reasons why you might need to reset your Hayward salt cell board. One common reason is if the board is not communicating properly with the rest of the pool system. You might also need to reset the board if you are experiencing issues with your pool’s salt or chlorine levels.