Polaris is one of the leading brands when it comes to pool cleaners and other pool equipment. Their thrust jet is an essential component of their cleaners, and it is responsible for providing the necessary force to move the cleaner around the pool. However, there are times when the thrust jet may need to be adjusted. In this article, we will take a look at how to adjust a Polaris thrust jet.
Before we begin, it is essential to note that adjusting the thrust jet is not a difficult task. However, it does require some basic knowledge of how the cleaner works and some tools. You will need a Phillips screwdriver, a flathead screwdriver, and a pair of pliers.
Step 1: Turn off the Cleaner
The first step in adjusting the thrust jet is to turn off the cleaner. This will ensure that the cleaner does not move while you are adjusting the thrust jet.
Step 2: Locate the Thrust Jet
The thrust jet is usually located at the back of the cleaner, and it is a small nozzle that releases water to provide the necessary force for the cleaner to move. Once you have located the thrust jet, you can proceed to the next step.
Step 3: Adjust the Thrust Jet
To adjust the thrust jet, you will need to use a Phillips screwdriver to loosen the screw that holds the thrust jet in place. Once the screw is loose, you can use a flathead screwdriver to adjust the direction of the thrust jet. You can move the thrust jet either up or down, left or right, depending on where you want the cleaner to go.
Step 4: Tighten the Screw
After adjusting the thrust jet, you will need to tighten the screw to keep it in place. Use the Phillips screwdriver to tighten the screw until it is snug.
Step 5: Test the Cleaner
Once you have tightened the screw, you can turn on the cleaner and test it to see if it moves in the direction you want it to go. If it is still not moving in the desired direction, you can repeat the process and adjust the thrust jet again.
Conclusion
In conclusion, adjusting the Polaris thrust jet is a simple task that can be done by anyone with basic knowledge of how the cleaner works. By following the steps outlined in this article, you can adjust the thrust jet and ensure that your cleaner moves in the direction you want it to go. Remember to turn off the cleaner before making any adjustments and to use the right tools for the job. With these tips, you can keep your pool clean and sparkling all year round.
You may also like: What Is The Thrust Jet Position On A Polaris Pool Cleaner?
FAQs – How Do You Adjust A Polaris Thrust Jet?
1. What is a Polaris Thrust Jet?
A Polaris Thrust Jet is a type of jet that is commonly used in swimming pool cleaners. It is responsible for propelling the cleaner around the pool and directing debris towards the cleaner’s suction port.
2. Why would I need to adjust a Polaris Thrust Jet?
You may need to adjust a Polaris Thrust Jet if your pool cleaner is not moving properly or is not picking up debris efficiently. Adjusting the thrust jet can help you optimize the cleaner’s performance and ensure that it is cleaning your pool effectively.
3. How do I adjust a Polaris Thrust Jet?
To adjust a Polaris Thrust Jet, you will need to turn the adjustment screw located on the back of the jet. Turning the screw clockwise will increase the amount of water flow through the jet, while turning it counterclockwise will decrease the flow. Experiment with different settings until you find the optimal flow rate for your pool cleaner.
4. Are there any precautions I should take when adjusting a Polaris Thrust Jet?
Yes, it is important to turn off the pool pump before adjusting the thrust jet to avoid injury or damage to the pool cleaner. Additionally, be sure to adjust the jet in small increments to avoid over- or under-adjusting it. Finally, always refer to your pool cleaner’s user manual for specific instructions on adjusting the thrust jet.
More to explore: How Do You Unclog A Hayward Impeller?