Adjusting the Thrust Jet on a Polaris Pool Cleaner

If you own a Polaris pool cleaner, you know how important it is to keep it running smoothly. One of the key components of the Polaris pool cleaner is the thrust jet, which helps to propel the cleaner through the water. However, if the thrust jet is not adjusted properly, it can cause the cleaner to move too slowly or too quickly, which can affect its ability to clean the pool effectively. In this article, we will discuss how to adjust the thrust jet on a Polaris pool cleaner.

Step 1: Turn Off the Pool Cleaner

Before you begin adjusting the thrust jet, make sure to turn off the Polaris pool cleaner. This will ensure that the cleaner does not accidentally turn on while you are working on it.

Step 2: Locate the Thrust Jet

The thrust jet is located on the back of the Polaris pool cleaner. It is a small nozzle that is used to direct water flow and propel the cleaner through the water. The thrust jet is usually located near the tail of the cleaner.

Step 3: Adjust the Thrust Jet

To adjust the thrust jet on a Polaris pool cleaner, you will need to use a flathead screwdriver. First, turn the screwdriver counterclockwise to loosen the thrust jet. Then, use the screwdriver to adjust the angle of the thrust jet. If you want the cleaner to move faster, adjust the thrust jet to a more vertical angle. If you want the cleaner to move slower, adjust the thrust jet to a more horizontal angle.

Step 4: Test the Pool Cleaner

After you have adjusted the thrust jet, turn on the Polaris pool cleaner and test it in the pool. Make sure that the cleaner is moving at the desired speed and direction. If the cleaner is still not moving properly, you may need to adjust the thrust jet again.

Step 5: Tighten the Thrust Jet

Once you have adjusted the thrust jet to the desired angle, use the flathead screwdriver to tighten it by turning it clockwise. Make sure that the thrust jet is securely tightened to prevent it from moving while the cleaner is in use.

Conclusion

Adjusting the thrust jet on a Polaris pool cleaner is a simple process that can greatly improve the cleaner’s performance. By following these steps, you can ensure that your Polaris pool cleaner is moving at the right speed and direction, and is cleaning your pool effectively. Remember to always turn off the cleaner before making any adjustments, and to test it in the pool after making any changes. With a properly adjusted thrust jet, your Polaris pool cleaner will be an effective and efficient tool for keeping your pool clean and clear.

FAQs for How Do You Adjust The Thrust Jet On A Polaris Pool Cleaner?

1. What is the thrust jet on a Polaris pool cleaner?

The thrust jet on a Polaris pool cleaner is a nozzle located on the back of the cleaner that propels it forward and helps it change direction.

2. Why would I need to adjust the thrust jet?

You may need to adjust the thrust jet if your Polaris pool cleaner is not moving as efficiently as it should be or if it is not reaching all areas of your pool. Adjusting the thrust jet can help improve the overall performance of the cleaner.

3. How do I adjust the thrust jet on my Polaris pool cleaner?

To adjust the thrust jet on your Polaris pool cleaner, first turn off the pool pump. Next, locate the thrust jet on the back of the cleaner and use a flathead screwdriver to turn the adjustment screw clockwise or counterclockwise to increase or decrease the water flow to the jet. Test the cleaner in your pool after each adjustment until you find the optimal setting for your pool.

4. What should I do if I am still having issues with my Polaris pool cleaner after adjusting the thrust jet?

If adjusting the thrust jet does not improve the performance of your Polaris pool cleaner, you may need to check for other issues such as clogged hoses or a malfunctioning filter. It may be best to consult a professional pool cleaner or Polaris technician for further assistance.