Skil saws are a popular tool for cutting a variety of materials such as wood, metal, and plastic. However, over time, the brush on the Skil saw can wear out, causing the saw to malfunction or stop altogether. If you’re experiencing issues with your Skil saw, it may be time to change the brush. Here’s how you can do it:
Step 1: Safety First
Before you start working on your Skil saw, make sure you’re wearing appropriate safety gear, including eye protection and gloves. Additionally, ensure that the saw is unplugged from any power source.
Step 2: Locate the Brush Caps
The brush caps are small plastic covers that protect the brush from damage. To locate the brush caps, look for two small screws on the side of the saw’s motor. Use a screwdriver to remove these screws and set them aside in a safe place.
Step 3: Remove the Brush Caps
Once you’ve removed the screws, gently pull the brush caps away from the motor. You may need to use a flathead screwdriver to pry them off if they are stuck.
Step 4: Remove the Brush Springs
Underneath the brush caps, you’ll find the brush springs. Use your fingers or a pair of pliers to carefully remove these springs and set them aside.
Step 5: Remove the Old Brushes
With the brush caps and springs removed, you can now access the old brushes. Gently pull these out of the motor and set them aside. Make sure to take note of which brush came from which side of the motor, as they may be different sizes.
Step 6: Install the New Brushes
Insert the new brushes into the motor, making sure to place each brush on the correct side. Push them in firmly to ensure a secure fit.
Step 7: Reinstall the Brush Springs and Caps
Once the new brushes are in place, it’s time to reinstall the brush springs and caps. Place the springs back onto the brushes and then gently push the brush caps back into place. Use your screwdriver to replace the screws you removed earlier.
Step 8: Test the Saw
Once you’ve completed the above steps, plug your Skil saw back in and turn it on to test it. If everything is working correctly, you should be able to use your saw as normal. If you’re still having issues, double-check that the brushes are installed correctly, or consult a professional for assistance.
In conclusion, changing the brush on a Skil saw is a simple process that can be done at home with the right tools and safety precautions. By following these steps, you can extend the life of your saw and avoid costly repairs.
Read Also: Is A Table Saw Better Than A Circular Saw?
Frequently Asked Questions: How Do You Change The Brush On A Skil Saw?
1. What are the signs that my Skil Saw needs a brush change?
If you notice that your Skil Saw is lacking power or is making a strange noise, it may be time to change the brushes. Another sign is if you notice sparking near the brushes.
2. Can I change the brushes on my Skil Saw myself?
Yes, you can. Changing the brushes on a Skil Saw is a simple process that you can do yourself. All you need is a screwdriver and a new set of brushes.
3. Which type of brushes should I use for my Skil Saw?
It is recommended that you use the same type of brushes that came with your Skil Saw. Your Skil Saw’s manual should have information on which type of brushes to use. If you are unsure, you can contact Skil’s customer service for assistance.
4. How often should I change the brushes on my Skil Saw?
The frequency of changing the brushes on your Skil Saw depends on how often you use it. If you use your Skil Saw frequently, you may need to change the brushes every few months. If you use it less often, you can wait longer between brush changes. It is best to check the brushes periodically to see if they need to be changed.
You may also like: Will A Diamond Blade Cut Titanium?