If you are an avid woodworker, then you know the value of a good fence for your skill saw. A skill saw fence is a vital accessory for any woodworker, as it helps to ensure that your cuts are straight, accurate, and consistent. The good news is that making a skill saw fence is a relatively simple project that you can complete in just a few hours, even if you are a beginner. In this article, we will show you how to make a skill saw fence step by step.
What You Will Need
Before we get started, here is a list of the tools and materials that you will need:
- Measuring tape
- Saw
- Drill
- Screws
- Wood glue
- Plywood or MDF board
- Square or straightedge
Step 1: Measure Your Saw Base
The first step in making a skill saw fence is to measure the base of your saw. Use a measuring tape to determine the length and width of your saw base. This will help you determine the size of the fence that you need to make.
Step 2: Cut Your Board
Next, use a saw to cut your plywood or MDF board to the desired length and width. Make sure that the board is at least as long as your saw base and wide enough to serve as a stable fence.
Step 3: Drill Holes for Your Saw Base
After cutting your board, drill holes for your saw base. The holes should be slightly larger than the screws that you will use to attach the fence to your saw base.
Step 4: Attach Your Saw Base
Once you have drilled your holes, attach your saw base to the fence using screws. Make sure that the screws are tight enough to hold the saw base in place but not so tight that they damage the board.
Step 5: Add a Straightedge
To make sure that your cuts are straight and accurate, add a straightedge to your fence. You can use a square or another straightedge to do this. Attach the straightedge to the fence using screws and wood glue.
Step 6: Test Your Fence
Finally, test your fence to make sure that it is working correctly. Use a piece of scrap wood to make a cut and check that the cut is straight and accurate. If necessary, make adjustments to your fence to ensure that it is working correctly.
Conclusion
As you can see, making a skill saw fence is a relatively simple project that you can complete in just a few hours. A good fence is essential for any woodworker, as it helps to ensure that your cuts are straight, accurate, and consistent. By following these steps, you can create a fence that will serve you well for many years to come.
You might be interested in: How Do You Cut Straight With A Skilsaw?
Frequently Asked Questions about Making a Skill Saw Fence
What materials do I need to make a skill saw fence?
To make a skill saw fence, you will need a sheet of plywood or MDF, a measuring tape, a pencil, a table saw, a drill, screws, a circular saw, a straight edge, and a clamping square.
Is it difficult to make a skill saw fence?
Making a skill saw fence is not difficult if you have basic woodworking skills and the necessary tools. However, it can be time-consuming and requires a lot of precision.
How do I attach the skill saw fence to my saw?
To attach the skill saw fence to your saw, you will need to drill holes in the fence that match the holes in your saw’s base plate. Then, you can attach the fence to the base plate using screws.
What are the benefits of using a skill saw fence?
Using a skill saw fence can help you make more accurate cuts, especially when making long or angled cuts. It also helps you to make repeat cuts more easily, which can save you time and reduce the risk of mistakes.
You might be interested in: Is It Bad To Leave Milwaukee Batteries On The Tool?