How Do You Put A Blade On A Wooden Saw?

When it comes to woodworking, one of the most important tools in your arsenal is the saw. And while there are many different types of saws available, some woodworkers prefer to use a traditional wooden saw. These saws are typically lightweight, easy to handle, and offer a level of precision that is difficult to achieve with other types of saws. However, before you can start using your wooden saw, you need to know how to properly put a blade on it.

Step 1: Choose the Right Blade

The first step in putting a blade on your wooden saw is to choose the right blade for the job. There are many different types of blades available, and each one is designed for a specific purpose. For example, if you are cutting through thick pieces of wood, you will need a blade with larger teeth. Conversely, if you are cutting through thinner pieces of wood, you will need a blade with smaller teeth.

Step 2: Remove the Old Blade

Once you have chosen the right blade for your project, it’s time to remove the old blade from your wooden saw. To do this, you will need to locate the blade tensioning screw on your saw. This is typically located near the handle of the saw. Loosen the screw and remove the old blade.

Step 3: Insert the New Blade

With the old blade removed, you can now insert the new blade into your wooden saw. To do this, you will need to slide the blade into the blade slot on the saw. Make sure that the teeth on the blade are pointing in the right direction. Once the blade is in place, tighten the blade tensioning screw to secure the blade in place.

Step 4: Adjust the Blade Tension

With the new blade in place, it’s time to adjust the blade tension. This is an important step because if the blade is not properly tensioned, it will not cut properly. To adjust the tension, you will need to use the blade tensioning screw. Turn the screw clockwise to increase the tension on the blade, and counterclockwise to decrease the tension on the blade. Once the tension is set, your wooden saw is ready to use!

Conclusion

Putting a blade on a wooden saw may seem like a daunting task, but it’s actually quite simple once you know the steps. By choosing the right blade, removing the old blade, inserting the new blade, and adjusting the blade tension, you can ensure that your wooden saw is ready to tackle any woodworking project that comes your way. So the next time you need to put a blade on your wooden saw, just follow these simple steps and you’ll be cutting with precision in no time!

Frequently Asked Questions about How Do You Put A Blade On A Wooden Saw?

1. What kind of blade do I need for my wooden saw?

It depends on the type of saw you have and the type of wood you will be cutting. Generally, a crosscut saw will have a finer blade for cutting across the grain, and a rip saw will have a coarser blade for cutting with the grain. Make sure to choose a blade that is the appropriate length and width for your saw.

2. How do I remove the old blade from my saw?

Most saws will have a mechanism for releasing the tension on the blade. This could be a lever or a screw that you can turn counterclockwise to loosen the tension. Once the tension is released, you can remove the blade by sliding it out of the saw’s frame.

3. How do I put the new blade onto my saw?

Start by inserting one end of the blade into the saw’s frame, and then use your fingers to guide it into the slot on the other side. Make sure the teeth of the blade are facing outward. Once the blade is in place, use the tension mechanism to tighten the blade by turning the lever or screw clockwise. The blade should be tight enough to make a “ping” sound when plucked, but not so tight that it feels like a guitar string.