Zodiac pool chlorinators are an excellent way to keep your pool clean and well-maintained. They work by releasing a controlled amount of chlorine into the water, which helps kill bacteria and other harmful organisms. However, like any other piece of equipment, they can sometimes malfunction, and you may need to reset them. In this article, we will discuss how to reset the Zodiac pool chlorinator.
Before we begin, it is essential to understand that there are two types of Zodiac pool chlorinators: the Zodiac LM3 and the Zodiac Tri. The process for resetting both devices is similar, but there are a few differences. We will discuss both in this article.
Resetting the Zodiac LM3 Chlorinator
The Zodiac LM3 chlorinator is a popular choice among pool owners. It is easy to use and requires minimal maintenance. If you need to reset this device, follow these steps:
Step 1: Turn off the power supply to the chlorinator. This is usually done by unplugging it from the power outlet or turning off the circuit breaker.
Step 2: Remove the cover from the control unit. You can do this by unscrewing the four screws on the sides of the unit.
Step 3: Locate the reset button on the circuit board. It is usually located near the bottom of the board and is labeled “RESET” or “RESTART.”
Step 4: Press and hold the reset button for at least 10 seconds. You should see the display screen light up and begin to cycle through various settings.
Step 5: Release the reset button and wait for the display screen to show “READY.” This indicates that the device has been successfully reset.
Step 6: Replace the cover on the control unit and turn the power supply back on.
Resetting the Zodiac Tri Chlorinator
The Zodiac Tri chlorinator is another popular choice among pool owners. It is a bit more advanced than the LM3 and has more settings and features. If you need to reset this device, follow these steps:
Step 1: Turn off the power supply to the chlorinator. This is usually done by unplugging it from the power outlet or turning off the circuit breaker.
Step 2: Remove the cover from the control unit. You can do this by unscrewing the two screws on the sides of the unit.
Step 3: Locate the reset button on the circuit board. It is usually located near the bottom of the board and is labeled “RESET” or “RESTART.”
Step 4: Press and hold the reset button for at least 10 seconds. You should see the display screen light up and begin to cycle through various settings.
Step 5: Release the reset button and wait for the display screen to show “READY.” This indicates that the device has been successfully reset.
Step 6: Replace the cover on the control unit and turn the power supply back on.
Conclusion
Resetting your Zodiac pool chlorinator is a simple process that can be done in a few minutes. By following the steps outlined in this article, you can ensure that your device is functioning correctly and keeping your pool clean and safe. Remember to always turn off the power supply before attempting any maintenance or repairs on your chlorinator. If you have any questions or concerns, contact a professional pool technician for assistance.
Related article: Is It Better To Run Pool At Night Or Day?
Frequently Asked Questions (FAQs) – How Do You Reset The Zodiac Pool Chlorinator?
1. What are the common reasons for resetting a Zodiac pool chlorinator?
There can be several reasons why you may need to reset your Zodiac pool chlorinator. Some of the common reasons include changing the type of salt used, replacing the cell, or resolving an error code.
2. How do I reset my Zodiac pool chlorinator?
To reset your Zodiac pool chlorinator, turn off the power to the system and disconnect the cell. Wait for a few minutes before reconnecting the cell and turning the power back on. Follow the instructions in the user manual to reset the chlorinator.
3. What should I do if my Zodiac pool chlorinator is still not working after resetting?
If your Zodiac pool chlorinator is still not working even after resetting, you should check for any error codes or warning lights. You can also try cleaning the cell or replacing it if necessary. If none of these steps work, you may need to contact a professional for further assistance.
4. How often should I reset my Zodiac pool chlorinator?
There is no fixed schedule for resetting a Zodiac pool chlorinator. You should only reset the chlorinator if there is a specific issue that needs to be resolved or if you are changing any of the settings or components. Always refer to the user manual and follow the manufacturer’s guidelines for maintenance and troubleshooting.
Related article: How Do You Reset A Hayward Tiger Shark?