Pool cleaners are great for keeping your pool clean and clear, but sometimes they can get clogged and stop working properly. This can be frustrating, especially if you have a lot of leaves and debris in your pool. Fortunately, there are some simple steps you can take to unclog your pool cleaner and get it back to working like new.
Step 1: Check the Hose
The first thing you should do is check the hose for any clogs. Sometimes, leaves and other debris can get stuck in the hose, preventing the water from flowing properly. To check the hose, turn off the pool pump and remove the cleaner from the pool. Then, detach the hose from the cleaner and check for any clogs. If you see any debris, use a hose or a long stick to remove it.
Step 2: Check the Filter
If the hose isn’t clogged, the next step is to check the filter. Many pool cleaners have a filter that needs to be cleaned regularly to prevent clogs. To check the filter, turn off the pool pump and remove the cleaner from the pool. Then, locate the filter and remove it from the cleaner. Rinse the filter with a hose to remove any debris. If the filter is really dirty, you may need to soak it in a cleaning solution overnight.
Step 3: Check the Wheels
If the hose and filter aren’t clogged, the next step is to check the wheels. Sometimes, the wheels can get clogged with debris and stop working properly. To check the wheels, turn off the pool pump and remove the cleaner from the pool. Then, flip the cleaner over and check the wheels for any debris. If you see any debris, use a hose or a long stick to remove it.
Step 4: Check the Drive Belt
If none of the above steps work, the next step is to check the drive belt. The drive belt is what powers the pool cleaner and can sometimes get stretched or worn out, causing the cleaner to stop working properly. To check the drive belt, turn off the pool pump and remove the cleaner from the pool. Then, locate the drive belt and check it for any signs of wear and tear. If the drive belt is worn out, you’ll need to replace it.
Step 5: Contact a Professional
If you’ve tried all of the above steps and your pool cleaner is still clogged, it may be time to contact a professional. A pool cleaning service can help diagnose and fix the problem, ensuring that your pool stays clean and clear all season long.
Conclusion
Unclogging a pool cleaner can be a frustrating task, but it’s essential for keeping your pool clean and clear. By following these simple steps, you can quickly and easily unclog your pool cleaner and get it back to working like new again. Remember to check the hose, filter, wheels, and drive belt, and don’t hesitate to contact a professional if you need help.
Read Also: Why Does My Polaris Hose Keep Tangling?
Frequently Asked Questions for How Do You Unclog A Pool Cleaner?
What are the common causes of pool cleaner clogs?
There are several reasons why a pool cleaner may become clogged. Some of the common causes include debris such as leaves, twigs, and rocks getting stuck in the cleaner’s hoses or filter, or a malfunctioning pool pump that is not providing enough suction.
How can I prevent my pool cleaner from getting clogged in the first place?
The best way to prevent your pool cleaner from getting clogged is to regularly clean your pool and remove any debris that may accumulate on the bottom. You can also install a leaf canister to trap larger debris before it reaches the pool cleaner.
What steps should I take if my pool cleaner becomes clogged?
First, turn off the pool pump and disconnect the pool cleaner from the pool wall. Then, remove the cleaner’s filter and clean it thoroughly. Next, check the hoses and remove any debris that may be blocking them. If the problem persists, you may need to take the cleaner apart and check for any obstructions in the motor or impeller.
Can I use chemicals to unclog my pool cleaner?
No, you should never use chemicals to unclog your pool cleaner. Chemicals can damage the pool cleaner’s components and may even be harmful to swimmers. Stick to using manual methods such as removing debris from the filter and hoses or disassembling the cleaner to remove any obstructions.
You might be interested in: How Do You Reset A Hayward Aquavac 500?