If you’re a DIY enthusiast, then you know how important it is to have a reliable circular saw in your toolkit. One of the most popular saws in the market is the Black and Decker 20v Circular Saw. This saw is not only powerful but also easy to use. However, changing blades on this saw can be a little bit tricky, especially if you’re new to using circular saws. In this guide, we’ll show you how to change the blade on a Black and Decker 20v Circular Saw step-by-step.
Step 1: Unplug the Saw
The first step in changing the blade on a Black and Decker 20v Circular Saw is to unplug it from the power source. This is essential for your safety as you don’t want to accidentally start the saw while changing the blade.
Step 2: Loosen the Blade Nut
The next step is to loosen the blade nut. To do this, you need to use the wrench that came with your saw. Insert the wrench into the blade nut and turn it counterclockwise. Make sure you hold the blade in place while doing this to prevent it from spinning.
Step 3: Remove the Blade
Once you have loosened the blade nut, you can now remove the blade. Simply pull it out of the saw and set it aside. Be careful when handling the blade as it can be sharp.
Step 4: Install the New Blade
With the old blade removed, you can now install the new one. Make sure that the teeth on the blade are facing forward. Insert the blade into the saw and align the hole in the blade with the arbor on the saw. Once the blade is in place, tighten the blade nut by turning it clockwise using the wrench.
Step 5: Check the Blade Tension
Before you start using the saw, it’s important to check the blade tension. To do this, press the blade down with your finger and check if there’s any movement. If the blade moves, then it’s not tight enough. Loosen the nut and tighten it a little bit more until the blade is secure.
Step 6: Test the Saw
With the new blade in place, it’s time to test the saw. Plug it in and turn it on to make sure that everything is working properly. If you hear any strange noises or notice any vibrations, then turn off the saw and check the blade tension again.
Conclusion
Changing the blade on your Black and Decker 20v Circular Saw is a simple process that anyone can do. Just make sure you follow these steps carefully to ensure your safety and the proper functioning of the saw. Always wear protective gear, such as gloves and eye goggles, when using power tools to prevent injuries.
You might be interested in: How Deep Should A Circular Saw Blade Be For Plywood?
Frequently Asked Questions
1. What kind of blade should I use for my Black and Decker 20v circular saw?
It is recommended to use a blade that is specifically designed for your saw’s size and power output. Check the saw’s manual or the manufacturer’s website for the recommended blade size and type.
2. How do I remove the old blade from my Black and Decker 20v circular saw?
First, unplug the saw and press the blade lock button to keep the blade from turning. Then, use a wrench to loosen the bolt holding the blade in place. Once the bolt is loose, remove it and the outer washer. Finally, lift the blade out of the saw.
3. How do I install a new blade on my Black and Decker 20v circular saw?
First, make sure the blade teeth are facing the right direction (towards the front of the saw). Place the blade onto the saw’s arbor and replace the outer washer and bolt. Tighten the bolt with a wrench, but be careful not to overtighten it. Finally, release the blade lock button and test the saw to make sure the blade is secured properly.
Recommended for you: What Is The Main Advantage Of Worm Gear Drive?