Pool owners often face the problem of their pool sweep staying in the deep end. This can be frustrating and can also lead to an unclean pool. There are various reasons why this can happen, and in this article, we will explore some of the possible causes and solutions.
Cause 1: Incorrect Hose Length
The hose length of the pool sweep plays a significant role in its movement. If the hose length is too short, the pool sweep will not be able to reach the shallow end of the pool. Consequently, it will stay in the deep end. On the other hand, if the hose length is too long, it can get tangled, leading to the pool sweep staying in one place.
The solution to this problem is to ensure that the hose length is correct. Most pool sweep manufacturers provide guidelines on the correct hose length for their products. It is essential to follow these guidelines to ensure that the pool sweep can reach all parts of the pool.
Cause 2: Uneven Pool Bottom
If the pool bottom is uneven, the pool sweep may have difficulty moving around the pool. This is because the wheels of the pool sweep may get stuck in the uneven areas. As a result, the pool sweep will stay in the deep end, where the pool bottom is usually flat.
The solution to this problem is to ensure that the pool bottom is even. This can be achieved by hiring a professional to level the pool bottom or using a pool bottom leveler. Once the pool bottom is even, the pool sweep should be able to move around the pool freely.
Cause 3: Low Water Flow
Another possible cause of the pool sweep staying in the deep end is low water flow. If the water flow is not strong enough, the pool sweep may not be able to move around the pool effectively. This is because the water flow helps to propel the pool sweep around the pool.
The solution to this problem is to check the water flow rate. The water flow rate should be within the range recommended by the pool sweep manufacturer. If the water flow rate is low, it may be necessary to clean the pool filter or pump or to install a larger pool pump.
Cause 4: Broken or Worn Out Parts
Finally, the pool sweep may stay in the deep end if it has broken or worn-out parts. For example, if the wheels or gears are worn out, the pool sweep may not be able to move around the pool effectively. Similarly, if the hose is damaged, it may not be able to suction the debris effectively.
The solution to this problem is to inspect the pool sweep regularly for any broken or worn-out parts. If any parts are damaged, they should be replaced immediately. Most pool sweep manufacturers provide replacement parts, and it is essential to use only genuine parts to ensure the pool sweep functions correctly.
Conclusion
There are various reasons why a pool sweep may stay in the deep end. However, by following the solutions provided in this article, pool owners can ensure that their pool sweep moves around the pool effectively. It is essential to remember that regular maintenance and inspection of the pool sweep is crucial to its proper functioning.
You may also like: Should A Hayward Pool Pump Run Continuously?
Frequently Asked Questions – Why Does My Pool Sweep Stay In The Deep End?
1. Why does my pool sweep only clean the deep end of the pool?
There could be a few reasons why your pool sweep is only cleaning the deep end of your pool. One common reason is that the water flow in your pool is not strong enough to push the pool sweep to the shallow end. Another reason could be that the pool sweep is not properly adjusted or balanced, causing it to favor the deep end of the pool.
2. How do I adjust my pool sweep to clean the shallow end of the pool?
To adjust your pool sweep to clean the shallow end of your pool, you will need to check the water flow and make sure it is strong enough to push the pool sweep to the other end of the pool. You may also need to adjust the weight or buoyancy of the pool sweep to ensure it is properly balanced and can move freely throughout the entire pool.
3. Can a clogged pool filter cause my pool sweep to stay in the deep end?
Yes, a clogged pool filter can cause your pool sweep to stay in the deep end of your pool. When your pool filter is clogged, it can reduce the water flow in your pool, making it difficult for the pool sweep to move around. Make sure to regularly clean or replace your pool filter to prevent this from happening.
4. Should I get a professional to look at my pool sweep if it keeps staying in the deep end?
If you have tried adjusting the pool sweep and checking the water flow, but it still only cleans the deep end of your pool, it may be time to call in a professional. A pool technician can inspect your pool sweep and identify any underlying issues that may be causing this problem. They can also provide recommendations on how to fix or replace your pool sweep if necessary.
Further reading: Does Rain Raise Or Lower Ph?