Why Is My Shark Vacuum Spitting Stuff Back Out?

Are you experiencing the same problem with your Shark vacuum cleaner? You turn on the vacuum, start cleaning your floors, and suddenly, you notice that it’s spitting stuff back out! This can be an annoying and frustrating problem, especially if you have to keep stopping and starting to pick up the debris the vacuum is spitting out.

If you’re wondering why this is happening and what you can do about it, you’ve come to the right place. In this article, we’ll explore some of the potential causes of your Shark vacuum spitting stuff back out and provide you with some solutions.

1. The Brush Roll is Clogged or Dirty

One of the most common reasons why a Shark vacuum is spitting stuff back out is a clogged or dirty brush roll. When the brush roll gets clogged with hair, dust, and debris, it can’t pick up and suck in the dirt and debris like it’s supposed to. As a result, the vacuum may start spitting out the debris it picked up during cleaning.

Solution: To fix this issue, turn off the vacuum and unplug it. Locate the brush roll and remove any debris or tangled hair from it. You can use a pair of scissors or a brush to remove the clogs. Once you’ve cleaned the brush roll, turn on the vacuum and test it on a small area of the floor to see if it’s still spitting stuff out.

2. The Filter is Dirty or Needs Replacing

Another possible reason for your Shark vacuum spitting stuff back out is a dirty or clogged filter. If the filter is dirty or clogged, it can’t properly trap and contain the dirt and debris. As a result, it may come out of the vacuum and onto your floors again.

Solution: Check the filter of your Shark vacuum and clean or replace it as necessary. If the filter is reusable, wash it with water and let it dry thoroughly before using it again. If it’s not reusable or too dirty to clean, replace it with a new one.

3. The Dust Cup is Overfilled

If your Shark vacuum has a dust cup, you may see stuff spitting back out if it’s overfilled. Just like with a clogged or dirty filter, an overfilled dust cup can’t hold any more dirt and debris, so it spits out the excess.

Solution: Stop cleaning and turn off the vacuum. Locate the dust cup and empty it. You may need to detach it from the vacuum to do this. Once you’ve emptied it, reattach the dust cup and resume cleaning.

4. The Hose or Nozzle is Blocked

If your Shark vacuum’s hose or nozzle is blocked, it can’t suction up dirt and debris like it’s supposed to. As a result, it may start spitting out the debris it picked up during cleaning.

Solution: Turn off the vacuum and unplug it. Check the hose and nozzle for any blockages and remove them. You can use a long tool, such as a coat hanger or a vacuum cleaner attachment, to push out the blockages. Once you’ve removed the blockages, turn on the vacuum and test it to see if it’s still spitting stuff out.

5. The Vacuum Belt is Loose or Broken

If your Shark vacuum’s belt is loose or broken, it may not be properly spinning the brush roll, which can lead to spitting out of debris.

Solution: Turn off the vacuum and unplug it. Locate the belt and check if it’s loose or broken. If it’s just loose, you may be able to tighten it yourself. If it’s broken, you’ll need to replace it with a new one. Once you’ve fixed or replaced the belt, turn on the vacuum and test it to see if it’s still spitting out debris.

Conclusion

A Shark vacuum that spits stuff back out can be a frustrating problem to deal with, but fortunately, it’s usually an easy one to fix. By checking and addressing the potential causes we’ve discussed here, you can get your Shark vacuum back to working order and enjoy clean floors once again.