Polaris 3900 pool cleaner is a popular choice for pool owners as it is efficient and easy to use. However, over time, you may need to adjust the cleaner to ensure it is working at its best. In this article, we will discuss how to adjust your Polaris 3900 pool cleaner to get the most out of it.
Step 1: Check the Tires
The first thing you need to do when adjusting your Polaris 3900 pool cleaner is to check the tires. The tires are an essential component of the cleaner as they help it move around the pool. If the tires are worn out or damaged, you may need to replace them. To check the tires, turn the cleaner upside down and inspect them. If you notice any cracks or signs of wear and tear, it is time to replace them.
Step 2: Adjust the Thrust Jet
The thrust jet is another critical component of the Polaris 3900 pool cleaner. It is responsible for providing the cleaner with the necessary power to move around the pool. If you notice that the cleaner is not moving as fast as it should, you may need to adjust the thrust jet. To do this, locate the thrust jet on the back of the cleaner, and turn it clockwise to increase the power or counterclockwise to decrease it. It is essential to make small adjustments to avoid damaging the cleaner.
Step 3: Adjust the Hose
The hose is another part of the Polaris 3900 pool cleaner that requires adjustment from time to time. If the hose is too long, it can get tangled up, which can affect the cleaner’s performance. On the other hand, if the hose is too short, the cleaner may not reach all parts of the pool. To adjust the hose, remove the cleaner from the pool and lay it on a flat surface. Remove the hose and adjust it to the desired length. When adjusting the hose, ensure that it is not too long or too short.
Step 4: Clean the Filter Bag
The filter bag is an essential component of the Polaris 3900 pool cleaner as it helps to trap dirt and debris. Over time, the filter bag can become clogged, which can affect the cleaner’s performance. To clean the filter bag, remove it from the cleaner and rinse it with a hose. If the filter bag is severely clogged, you may need to replace it.
Step 5: Check the Feed Hose
The feed hose is the hose that connects the cleaner to the pool’s return line. If the feed hose is too short, it can cause the cleaner to get stuck in one area of the pool. On the other hand, if the feed hose is too long, it can get tangled up, which can affect the cleaner’s performance. To adjust the feed hose, turn off the pool pump and remove the cleaner from the pool. Adjust the feed hose to the desired length and reconnect it to the return line.
Conclusion
Adjusting your Polaris 3900 pool cleaner is essential to ensure it is working at its best. By following the steps outlined in this article, you can easily adjust your pool cleaner and keep it in good working condition. Remember to check the tires, adjust the thrust jet, adjust the hose, clean the filter bag, and check the feed hose. By doing these things, you can ensure that your Polaris 3900 pool cleaner is working efficiently and effectively.
You might be interested in: Do You Put Chemicals Or Vacuum Pool First?
Frequently Asked Questions (FAQs) for How Do I Adjust My Polaris 3900 Pool Cleaner?
1. How do I adjust the speed of my Polaris 3900 pool cleaner?
To adjust the speed of your Polaris 3900 pool cleaner, you need to adjust the flow control valve. This valve is located on the pool return line and can be adjusted by turning it clockwise or counterclockwise. Turning it clockwise will decrease the flow rate and slow down the cleaner, while turning it counterclockwise will increase the flow rate and speed up the cleaner.
2. How do I adjust the sweep hose of my Polaris 3900 pool cleaner?
To adjust the sweep hose of your Polaris 3900 pool cleaner, you need to adjust the sweep hose adjustment screw. This screw is located on the back of the cleaner and can be adjusted by turning it clockwise or counterclockwise. Turning it clockwise will decrease the pressure and shorten the sweep hose, while turning it counterclockwise will increase the pressure and lengthen the sweep hose.
3. How do I adjust the hose length of my Polaris 3900 pool cleaner?
To adjust the hose length of your Polaris 3900 pool cleaner, you need to add or remove hose sections. The cleaner comes with 31 feet of hose, but you can add or remove sections as needed to fit the size of your pool. To add or remove sections, simply twist and lock or unlock and remove the hose sections as necessary.
4. How do I adjust the wheel RPM of my Polaris 3900 pool cleaner?
To adjust the wheel RPM of your Polaris 3900 pool cleaner, you need to adjust the thrust jet. This jet is located on the back of the cleaner and can be adjusted by turning it clockwise or counterclockwise. Turning it clockwise will decrease the RPM and slow down the wheels, while turning it counterclockwise will increase the RPM and speed up the wheels.
Related article: How Do I Hard Reset This?