Are you struggling with the last 2 inches of water in your pool? It can be frustrating to see that little bit of water just sitting there, making your pool look dirty and uninviting. But don’t worry, there are a few things you can do to get rid of it and enjoy a crystal-clear pool all summer long.
Check Your Skimmer and Pump
The first thing you should do is make sure your skimmer and pump are working properly. If they are not functioning correctly, they may not be able to remove the last bit of water from your pool. Check to see if there is any debris or clogs in the skimmer or pump, and clean them out if necessary. You can also try adjusting the skimmer and pump settings to see if that helps.
Use a Submersible Pump
If your skimmer and pump are working properly but you still can’t get rid of the last 2 inches of water, you may need to use a submersible pump. This is a device that you can place in your pool to pump out the remaining water. You can either purchase or rent a submersible pump from a pool supply store or online retailer.
Before using a submersible pump, make sure to read the instructions carefully and follow all safety precautions. You will need to drain the water into a safe location, such as a storm drain or a designated sewer cleanout. Do not drain the water onto your lawn or into a street or alley.
Try a Siphon
If you don’t want to use a submersible pump, you can try using a siphon to remove the remaining water from your pool. This method involves creating a vacuum that will draw the water out of your pool and into a drain or other designated location.
To create a siphon, you will need a long hose and a vacuum. Place one end of the hose in the pool and the other end in the drain or other location where you want the water to go. Use the vacuum to suck the air out of the hose, creating a vacuum that will draw the water out of the pool and into the drain.
Final Thoughts
Getting rid of the last 2 inches of water in your pool may seem like a small issue, but it can make a big difference in the overall appearance and cleanliness of your pool. By checking your skimmer and pump, using a submersible pump, or trying a siphon, you can easily remove that last bit of water and enjoy a beautiful pool all summer long.
More to explore: How Do I Reset My Hayward Pool Pump?
Frequently Asked Questions (FAQs) – How Do I Get Rid Of The Last 2 Inches Of Water In My Pool?
1. Why is it important to remove the last 2 inches of water from my pool?
Removing the last 2 inches of water from your pool is important as it prevents the growth of algae and bacteria that thrive in stagnant water. It also prevents water from freezing and expanding in cold weather, which can damage your pool.
2. What are some methods to remove the last 2 inches of water from my pool?
One of the most effective methods is to use a submersible pump to drain the remaining water. You can also use a wet/dry vacuum or a pool cover pump. If you have a sand filter, you can backwash it to remove the last 2 inches of water.
3. Can I just leave the last 2 inches of water in my pool and treat it with chemicals?
While adding chemicals may help to prevent the growth of bacteria and algae, it is not recommended to leave the last 2 inches of water in your pool. Stagnant water can still attract insects, animals, and debris that can cause damage to your pool. It is always best to remove the remaining water and properly close your pool for the season.
4. Do I need to hire a professional to remove the last 2 inches of water from my pool?
No, you do not necessarily need to hire a professional to remove the last 2 inches of water from your pool. However, if you are unsure about the best method to use or have any concerns, it may be best to consult a professional pool service to ensure your pool is properly closed for the season.
Read Also: Can Pressure Pump Be Adjusted?