Quick Guide: Resetting Your Roomba 620 in 5 Simple Steps

Are you experiencing trouble with your Roomba 620? Perhaps it’s not performing as efficiently as it used to, or you’re encountering technical glitches that are hindering its operation. In such cases, knowing how to reset your Roomba 620 can prove to be invaluable. This quick guide will provide you with simple, step-by-step instructions to reset your Roomba 620 and get it back on track in no time.

By following the easy-to-understand steps outlined in this guide, you can troubleshoot and resolve common issues with your Roomba 620. No longer will you have to struggle with figuring out how to reset your device, as we break down the process into five straightforward actions. Whether you’re a first-time Roomba user or a seasoned owner, mastering the art of resetting your Roomba 620 with our guide will ensure a seamless and trouble-free cleaning experience.

Key Takeaways
To reset your Roomba 620, first, press and hold the “Clean” button for at least 10 seconds until you hear a tone. Then release the button, and your Roomba 620 will restart and reset to its default settings.

Why Reset Your Roomba 620

Resetting your Roomba 620 can be beneficial for various reasons. First, it can help to troubleshoot and resolve any minor issues or errors that your Roomba may be experiencing. By performing a reset, you can clear out any temporary glitches that are interfering with the robot’s performance. This can include issues like navigation problems, connectivity issues, or unresponsive behavior.

Secondly, resetting your Roomba can also help to provide a fresh start for the device. Over time, the robot’s memory and settings may become cluttered or corrupted, leading to decreased efficiency. By resetting the Roomba, you can clear out the accumulated data and restore it to its original factory settings, ensuring optimal performance.

In addition, resetting the Roomba 620 can also be a useful step in the event of transferring ownership or preparing the device for resale. By wiping the previous user’s data and settings, you can ensure that the new owner starts with a clean slate, and the Roomba performs effectively in its new environment.

Step 1: Powering Off Your Roomba 620

To power off your Roomba 620, start by locating the “CLEAN” button on the device. Once you have found it, press and hold this button for approximately 10 seconds. You will notice the lights on the Roomba 620 turn off, indicating that the device is now powered down. Another method to power off your Roomba 620 is by flipping it over and locating the power switch near the main brushes. Simply pushing the power switch to the “off” position will also power down the device.

It is essential to ensure that your Roomba 620 is turned off before performing any troubleshooting or maintenance tasks. By following this simple step, you can safely access and handle the device without any risk of injury or damage. Powering off the Roomba 620 is the first and crucial step in resetting the device, and it sets the foundation for a smooth and successful troubleshooting process.

Step 2: Accessing The Reset Buttons

To access the reset buttons on your Roomba 620, start by turning the vacuum over and locating the button cover. Depending on your model, the reset buttons may be positioned differently, but they are usually found next to the main brushes or underneath a small cover. Once you have located the reset buttons, use a small flathead screwdriver or a similar tool to gently pry open the cover and reveal the reset buttons underneath.

It’s essential to exercise caution and not apply too much force when accessing the reset buttons to avoid damage. In the case of the Roomba 620, there are dedicated buttons for various functions, including the reset button. When accessing the reset buttons, be mindful of the specific button to press, as pressing the wrong one can cause unintended consequences. By following these steps, you can easily access the reset buttons on your Roomba 620 and initiate the resetting process when necessary.

Step 3: Pressing The Reset Buttons

In Step 3, you will locate the reset buttons on the Roomba 620. Typically, these buttons are found on the underside of the device, near the main power switch. Once you have located the reset buttons, use a small object, such as a paperclip, to press and hold the buttons for about 10-15 seconds. It is important to ensure that your Roomba is powered off before pressing the reset buttons.

Pressing the reset buttons will initiate the reboot process for your Roomba 620, effectively clearing any temporary glitches or issues that may be causing performance issues. This step is crucial in resetting the device to its default settings and resolving any technical malfunctions. After holding the reset buttons for the specified duration, you can release them, and proceed to the subsequent steps in the reset procedure to ensure your Roomba 620 is functioning optimally.

Step 4: Powering On Your Roomba 620

To power on your Roomba 620, press the “Clean” button on the top of the unit. Once pressed, the indicator light will illuminate, signaling that the robot is being powered on. Give the Roomba a few seconds to start up, and you will hear a series of beeps, indicating that it’s ready to begin cleaning.

After powering on, always ensure that the robot is placed on a level surface with enough room to move freely. Avoid tight spaces or obstacles that could obstruct its movement. Additionally, make sure the area is well lit, as this will help the Roomba efficiently navigate and complete its cleaning cycle. With the Roomba now powered on and ready to go, you are one step closer to enjoying a clean and tidy living space.

Step 5: Verifying The Reset

After completing the reset process on your Roomba 620, it is essential to verify that the reset was successful. First, check if the indicator lights on the robot are displaying the correct status. The power light should be solid green, while the battery light blinks amber. If the lights do not indicate the correct status, the reset may not have been successful, prompting you to repeat the process.

Next, test the Roomba by pressing the “Clean” button and ensuring that it starts its cleaning cycle without any issues. If the robot starts cleaning as expected, it indicates that the reset was successful. Additionally, you can also connect the Roomba to the iRobot HOME app and verify that it is responding appropriately to commands and displaying accurate information. If everything checks out, you can be confident that your Roomba 620 has been successfully reset and is ready to resume its cleaning duties.

Troubleshooting Tips

If your Roomba 620 is still not working properly after the reset, here are some troubleshooting tips to help identify and resolve any issues. First, check the brushes and the vacuum intake for any debris or obstructions. Clearing any blockages can significantly improve the performance of your Roomba.

Next, ensure that the wheels and sensors are clean and free from any dirt, dust, or hair buildup. Dirty wheels can cause the Roomba to get stuck, while sensor obstructions can affect its navigation ability. Additionally, check the battery and charging contacts to make sure they are clean and properly connected. A dirty battery or charging contacts can result in poor battery life or charging issues.

If the troubleshooting tips mentioned above do not resolve the issues, it’s recommended to refer to the Roomba 620 user manual for more in-depth troubleshooting steps or contact the Roomba customer support for further assistance.

Maintenance And Care

To ensure the longevity and efficiency of your Roomba 620, regular maintenance and care are essential. Start by regularly emptying the dustbin and cleaning the filter to prevent clogs and maintain suction power. Ensure that the brushes and wheels are free from debris and hair, and clean them as needed. It’s also important to wipe down the sensors and charging contacts to maintain optimal performance.

Additionally, consider scheduling routine maintenance, such as replacing the filter and brushes as recommended by the manufacturer. This will help maintain the effectiveness of your Roomba 620 over time. Lastly, store your Roomba in a clean, dry area when not in use to prevent dust buildup and potential damage. Following these maintenance and care practices will keep your Roomba 620 running smoothly and efficiently for years to come.


In a fast-paced world, the Roomba 620 offers a convenient and efficient solution to keeping our homes clean. Understanding how to reset the device is crucial in ensuring its optimal performance and longevity. With just five simple steps, the process of resetting the Roomba 620 can be easily mastered, allowing users to seamlessly address any potential issues and resume enjoying the benefits of automated vacuuming. By following the quick guide outlined in this article, users can confidently navigate the reset process, maintaining a well-maintained and fully-functional Roomba 620 for long-term use.

In conclusion, the ability to reset the Roomba 620 in a few simple steps not only enhances the user experience but also serves as a testament to the ease and efficiency of this innovative cleaning technology. With the knowledge gained from this guide, users can take full advantage of the Roomba 620’s capabilities, eliminating any potential obstacles that may arise and ensuring a consistently impressive performance.

Leave a Comment