Introduction:
Having a pool cleaner is a great way to keep your pool clean and crystal clear, but sometimes, turning it on can be a bit of a challenge. If you’ve just purchased an Aiper pool cleaner or have had one for a while and are wondering how to turn it on, you’ve come to the right place. In this article, we’ll be discussing some simple steps you can follow to turn on your Aiper pool cleaner.
Step 1: Preparation
Before turning on your Aiper pool cleaner, you’ll need to prepare your pool. This means removing any large debris such as leaves or twigs that may be floating on the surface of the water. It’s also a good idea to brush the walls and floor of the pool to loosen any dirt or algae that may have built up.
Step 2: Connect the Hose
The next step is to connect the hose to the pool cleaner. The hose should fit snugly onto the cleaner’s suction inlet. Make sure the hose is free of kinks or bends that may impede the flow of water.
Step 3: Turn on the Filter Pump
Once the hose is connected, turn on the filter pump. This will create suction that will pull water through the cleaner and remove dirt and debris from your pool.
Step 4: Turn on the Aiper Pool Cleaner
Now that the filter pump is running, it’s time to turn on your Aiper pool cleaner. This is typically done by pressing the power button on the cleaner. Some models may have a remote control that can be used to turn the cleaner on and off.
Step 5: Adjust the Suction
Once the cleaner is on, you may need to adjust the suction to ensure it’s picking up debris effectively. Most Aiper pool cleaners have a suction adjustment valve that can be used to control the amount of suction. If you notice the cleaner isn’t picking up debris as well as it should, try adjusting the suction.
Step 6: Monitor the Cleaner
While the Aiper pool cleaner is running, it’s important to keep an eye on it to ensure it’s not getting stuck or tangled in any pool features such as stairs or ladders. If you notice the cleaner is getting stuck, you may need to adjust its path or move any obstacles out of its way.
Conclusion:
Turning on your Aiper pool cleaner is a simple process that can be done in just a few steps. By following the steps outlined in this article, you can ensure your pool stays clean and clear all season long. Remember to always monitor your pool cleaner while it’s running to ensure it’s working effectively and efficiently.
Related article: Should I Shock The Pool After Vacuuming?
Frequently Asked Questions – How Do I Turn On My Aiper Pool Cleaner?
1. How do I turn on my Aiper pool cleaner?
To turn on your Aiper pool cleaner, locate the power button on the device and press it. The power button is usually located on the top of the cleaner or on the control panel. Once you press the power button, the device will turn on and start cleaning your pool.
2. What should I do if my Aiper pool cleaner doesn’t turn on?
If your Aiper pool cleaner doesn’t turn on, there are a few things you can check. First, make sure that the device is properly plugged in and that the outlet is working. If the outlet is working, check the power cord to make sure it’s not damaged. If everything seems to be in order, try resetting the device by unplugging it for a few minutes and then plugging it back in.
3. Can I control my Aiper pool cleaner with a remote?
Yes, some models of Aiper pool cleaners come with a remote control that allows you to control the device from a distance. To use the remote control, make sure that the device is turned on and within range of the remote. Then, use the buttons on the remote to control the device’s movements and settings.
4. How long should I run my Aiper pool cleaner?
The amount of time you should run your Aiper pool cleaner depends on the size of your pool and how dirty it is. As a general rule, you should run the device for at least 2-3 hours to ensure that it cleans the entire pool. If your pool is particularly dirty, you may need to run the cleaner for longer or run it multiple times to get the desired results.
Read Also: How Do You Adjust The Pressure Relief Valve On A Polaris 360?