Polaris is a popular brand of pool cleaners that has been used by many pool owners for years. One of the most important parts of a Polaris pool cleaner is the tail sweep. The tail sweep is the part of the cleaner that helps to direct debris and dirt towards the cleaner’s filter bag. Over time, the tail sweep may need to be adjusted in order to ensure that it is working properly. In this article, we will discuss how to adjust a Polaris tail sweep.
Before we begin, it’s important to note that the steps involved in adjusting a Polaris tail sweep may vary depending on the model of your pool cleaner. Be sure to consult your owner’s manual or contact Polaris customer service for specific instructions on how to adjust your particular model.
Step 1: Turn off the pool cleaner
The first step in adjusting a Polaris tail sweep is to turn off the pool cleaner. This is important for safety reasons and to ensure that you can work on the cleaner without any interference.
Step 2: Locate the tail sweep
Next, you will need to locate the tail sweep on your Polaris pool cleaner. The tail sweep is the part of the cleaner that is attached to the end of the hose and extends out behind the cleaner.
Step 3: Adjust the sweep hose
To adjust the tail sweep, you will need to adjust the sweep hose. The sweep hose is the part of the cleaner that attaches to the tail sweep and extends out from the cleaner’s body. To adjust the sweep hose, you should first detach it from the tail sweep. Once detached, adjust the length of the hose to the appropriate length for your pool. The hose should be long enough to reach the farthest corners of your pool, but not so long that it becomes tangled or bent.
Step 4: Adjust the tail sweep jet
The tail sweep jet is the part of the cleaner that directs water towards the tail sweep. To adjust the tail sweep jet, you will need to turn it clockwise or counterclockwise. Turning the jet clockwise will reduce the amount of water that flows to the tail sweep, while turning it counterclockwise will increase the amount of water that flows to the tail sweep.
Step 5: Test the tail sweep
Once you have adjusted the sweep hose and tail sweep jet, it’s important to test the tail sweep to make sure that it is working properly. Turn the pool cleaner back on and observe the tail sweep as it moves around the pool. If the tail sweep is not directing debris towards the filter bag, you may need to make further adjustments.
In conclusion, adjusting a Polaris tail sweep is a simple process that can be done by any pool owner. By following these steps, you can ensure that your Polaris pool cleaner is working at its best and keeping your pool clean and clear. Remember to consult your owner’s manual or contact Polaris customer service for specific instructions on how to adjust your particular model.
You may also like: Why Is My Vacuum Not Strong Enough?
Frequently Asked Questions – How Do You Adjust A Polaris Tail Sweep?
1. What is a Polaris Tail Sweep?
A Polaris Tail Sweep is a device that is attached to the end of a pool cleaner’s hose to help sweep debris from the corners and edges of the pool.
2. How do I know if my Polaris Tail Sweep needs adjusting?
If you notice that the tail sweep is not moving properly or is not making contact with the walls and corners of the pool, it may need adjusting. You may also notice that debris is accumulating in certain areas of the pool that the tail sweep is not reaching.
3. How do I adjust my Polaris Tail Sweep?
To adjust your Polaris Tail Sweep, start by turning off your pool cleaner and removing the hose from the pool. Next, adjust the sweep hose weight by moving it up or down the hose until the tail sweep is at the correct angle and making contact with the walls and corners of the pool. Test the tail sweep by placing it in the water and turning on the pool cleaner to ensure it is working properly.
You might be interested in: How Do You Keep Polaris From Going In Circles?