When it comes to working with power tools, one of the most important things to know is how to change and fit blades properly. In this article, we will be taking a look at the process of fitting a Dewalt circular saw blade, step-by-step.
Gather Your Tools
Before you begin the process of fitting your Dewalt circular saw blade, you will need to gather the necessary tools. These include:
- A Dewalt circular saw
- A Dewalt circular saw blade
- A wrench or Allen key (depending on the model of your saw)
- A pair of gloves (optional)
Step-by-Step Guide
Step 1: Unplug the Saw
Before you begin any work on your saw, make sure that it is unplugged from the power source. This will prevent any accidents from occurring while you are working on the blade.
Step 2: Loosen the Blade Nut
Next, you will need to locate the blade nut on your saw. This is usually located on the right-hand side of the saw. Use your wrench or Allen key to loosen the blade nut by turning it counterclockwise. Be sure to hold the blade in place with your other hand to prevent it from rotating.
Step 3: Remove the Old Blade
Once the nut is loose enough, you can remove the old blade from the saw. Carefully lift the blade off of the saw, taking care not to touch the sharp teeth.
Step 4: Clean the Blade Area
With the old blade removed, it is a good idea to clean the blade area with a cloth or brush. This will help to remove any debris and ensure that the new blade fits properly.
Step 5: Install the New Blade
Take your new Dewalt circular saw blade and place it onto the saw, making sure that the teeth are facing in the right direction. Align the hole in the center of the blade with the spindle on the saw.
Step 6: Tighten the Blade Nut
Once the blade is in place, use your wrench or Allen key to tighten the blade nut. Be sure to hold the blade in place with your other hand to prevent it from rotating. You should tighten the nut firmly, but not too tight.
Step 7: Test the Blade
Finally, you can test the blade to make sure that it is working properly. Plug the saw back in and turn it on. Listen for any unusual noises or vibrations, and check that the blade is spinning smoothly.
Conclusion
Changing and fitting a Dewalt circular saw blade is a relatively simple process, but it is important to follow the steps carefully to ensure that the blade is installed correctly. By using the right tools and taking care when handling the blade, you can ensure that your saw is working safely and efficiently.
Related article: What Kind Of Saw Do I Need To Build A Fence?
Frequently Asked Questions (FAQs) for How Do You Fit A Dewalt Circular Saw Blade?
1. What size of saw blade should I use for my Dewalt circular saw?
Dewalt circular saws usually come with a blade diameter of 7-1/4 inches, which is the most common size for circular saws. However, some models may come with a different blade size, so it’s essential to check your saw’s manual to ensure you use the correct blade size.
2. How do I remove the old blade from my Dewalt circular saw?
Before removing the old blade, unplug the saw from the power source. Then, locate the blade lock button near the blade guard, push it in, and hold it down. Use the wrench that comes with the saw to loosen the bolt that holds the blade in place. Once the bolt is loose, remove it and the blade.
3. How do I install the new blade on my Dewalt circular saw?
To install the new blade, ensure the saw is unplugged from the power source. Align the new blade with the saw’s arbor, ensuring the blade teeth face the front of the saw. Use the blade wrench to tighten the bolt, making sure it’s snug but not overtightened. Lastly, release the blade lock button.
4. Can I sharpen my Dewalt circular saw blade?
Yes, you can sharpen your Dewalt circular saw blade. However, it’s essential to use the correct sharpening tool and technique to avoid damaging the blade. It’s recommended to have a professional sharpen the blade or purchase a new one if it’s too worn out.
Further reading: How Thick Of Wood Can You Cut With A Circular Saw?