Vacuum cleaners have been around for almost a century and have become an essential household appliance. However, they often come with limited attachments, making it challenging to clean tight spaces, crevices, and hard-to-reach areas. This is where small vacuum attachments come in handy. They are specifically designed to clean small nooks and crannies, effectively removing stubborn dirt, dust, and debris. Here’s how to make a small vacuum attachment.
Materials Needed:
1. PVC pipe
2. PVC end cap
3. Adhesive
4. Drill
5. Sandpaper
6. Saw
7. Sharp cutting knife
8. Cardboard or paper
9. Tape measure
Step 1: Measure and Cut PVC Pipe
Measure the area where you want to reach with the attachment and add about an inch to it. Then, using a saw or cutting knife, cut the PVC pipe to the desired length. Remember to cut it to the appropriate width that your vacuum hose can fit snugly.
Step 2: Sand the Edges
After cutting the pipe, sand the edges with sandpaper. This ensures that the cut is free of rough edges that can damage any surfaces the attachment comes into contact with.
Step 3: Cut a Hole In the End Cap
Using the drill or cutting knife, cut a hole in the center of the PVC end cap. The hole should be slightly smaller than the width of the pipe you cut in step 1.
Step 4: Insert Pipe Through the End Cap
Insert the PVC pipe through the hole in the end cap. Ensure that the end cap fits tightly around the pipe.
Step 5: Attach the End Cap to the PVC Pipe
Using adhesive, attach the end cap to the PVC pipe. Apply a small amount of adhesive around the edges of the hole before attaching the end cap to the PVC pipe.
Step 6: Create a Sealing Solution
Create a sealing solution by cutting a small piece of cardboard or paper and wrapping it around the joint between the PVC pipe and the end cap. This ensures that the attachment can connect to the vacuum hose without any air leaks.
Step 7: Connect the Small Vacuum Attachment to the Vacuum
Using the sealing solution, connect the small vacuum attachment to the vacuum hose. The attachment should now be ready for use.
In conclusion, making a small vacuum attachment is a simple process that doesn’t require any specialized skills or tools. With the right materials and a little bit of patience, you can create a customized attachment that suits your individual needs. Give it a try, and you’ll be amazed at how versatile and effective a small vacuum attachment can be.
Related article: How Do You Use A Cheap Pool Vacuum?
Frequently Asked Questions About Making a Small Vacuum Attachment
What materials do I need to make a small vacuum attachment?
To make a small vacuum attachment, you will need a few materials such as a plastic bottle, scissors, and hot glue. You may also need a fine mesh screen or a cloth filter if you want to prevent debris from entering the vacuum cleaner.
How do I cut the plastic bottle for the vacuum attachment?
To create the attachment, you need to cut the plastic bottle to the desired size and shape. Use a marker to draw the outline of the attachment on the bottle, and use scissors to carefully cut along the line. Be sure to smooth out any sharp edges with sandpaper or a file.
How do I attach the plastic bottle to my vacuum cleaner?
To attach the plastic bottle to your vacuum cleaner, you can use hot glue to secure it in place. First, hold the bottle in the desired position and mark its location on the vacuum cleaner hose. Apply hot glue to the marked area and press the bottle firmly against it. Allow the glue to dry completely before using the attachment.
Can I use the small vacuum attachment for cleaning my car or computer keyboard?
Yes, the small vacuum attachment is perfect for cleaning tight spots such as car interiors, computer keyboards, and other hard-to-reach areas. You can also use it to clean pet hair from furniture, dust from shelves and bookcases, and debris from inside drawers. Just be sure to use the appropriate filter or screen to prevent debris from entering the vacuum cleaner.
Read Also: 5 Simple Tips to Boost the Suction Power of Your Shark Robot Vacuum