Woodworking enthusiasts often find themselves struggling with cluttered workspaces and disorganized tools. One tool that can be particularly difficult to store is the saw blade. However, with a few basic woodworking skills and some simple materials, you can easily create a wooden saw blade holder that will keep your blades organized and easily accessible.
Materials:
– 1 piece of hardwood, such as oak or maple, measuring 1 inch thick, 3 inches wide, and 24 inches long
– 2 pieces of hardwood, measuring 1 inch thick, 3 inches wide, and 6 inches long
– Wood glue
– 1-inch wood screws
– Drill
– Saw
– Sandpaper
– Wood stain or paint (optional)
Step 1: Cut the Pieces
Begin by cutting the 24-inch piece of hardwood into two equal pieces, each measuring 12 inches long. Then, cut each of the 6-inch pieces of hardwood in half, creating four pieces that each measure 3 inches long.
Step 2: Create the Base
Take one of the 12-inch pieces of hardwood and apply a thin layer of wood glue to one end. Place one of the 3-inch pieces of hardwood against the glued end, with the top flush with the top of the 12-inch piece. Use a clamp to hold the two pieces together and allow the glue to dry.
Repeat this process with the other 12-inch piece of hardwood and the remaining three 3-inch pieces.
Step 3: Attach the Two Bases Together
Once the glue has dried, use a drill to make two pilot holes through the top of one of the bases and into the bottom of the other base. Then, use 1-inch wood screws to attach the two bases together.
Step 4: Create the Blade Slots
Using a saw, make cuts into the top of the wooden base, creating slots that are wide enough to hold your saw blades. Make sure to space the slots evenly apart and leave enough space between them to easily remove and replace the blades.
Step 5: Sand and Finish
Use sandpaper to smooth out any rough edges or splinters on the wooden saw blade holder. If desired, apply a wood stain or paint to give the holder a finished look.
Your wooden saw blade holder is now complete and ready to use. Simply slide your saw blades into the slots and keep them organized and easily accessible in your workshop. With this simple woodworking project, you can add a touch of organization and functionality to your workspace.
Recommended for you: What Is The Difference Between A Rafter Square And A Speed Square?
Frequently Asked Questions (FAQs) for How Do You Make A Wooden Saw Blade Holder?
1. What materials do I need to make a wooden saw blade holder?
To make a wooden saw blade holder, you will need plywood, wood glue, clamps, sandpaper, and a saw.
2. Is it difficult to make a wooden saw blade holder?
No, it is not difficult to make a wooden saw blade holder. As long as you follow the instructions and have the necessary tools, it can be a fun and easy DIY project.
3. Can I customize the size of my saw blade holder?
Yes, you can customize the size of your saw blade holder to fit your specific saw blades. Simply measure the size of your saw blades and adjust the measurements accordingly when cutting the plywood.
4. Can I use a different type of wood besides plywood?
Yes, you can use a different type of wood besides plywood. However, keep in mind that the thickness and strength of the wood may affect the durability of the saw blade holder. It is recommended to use a strong and sturdy wood for the best results.
More to explore: Will Diamond Blade Cut Rebar?