Do you have a floating chlorinator in your pool and are wondering how to open it? Chlorinators are important for maintaining the hygiene of your pool water by sanitizing it. However, if you don’t know how to open the chlorinator, it can be a frustrating experience. In this article, we will guide you through the steps to open a floating chlorinator properly.
Step 1: Turn Off the Pool Pump
The first step to opening the floating chlorinator is to turn off the pool pump. This is important as it will prevent the chlorinator from being damaged due to the pressure of the water flow. Make sure the pump is completely turned off and not just on a low setting.
Step 2: Retrieve the Chlorinator
Next, you need to retrieve the chlorinator from the pool. Some chlorinators have a handle or a rope that you can use to pull them out of the water. If your chlorinator doesn’t have a handle or a rope, you can use a pool skimmer to fish it out of the water.
Step 3: Unscrew the Cap
Once you have retrieved the chlorinator, the next step is to unscrew the cap. The cap will be located on the top of the chlorinator and is usually secured with a latch or a screw. Use a screwdriver, if necessary, to remove the screw or unlatch the cap. Be careful not to lose the screw or the latch as you will need it to secure the cap back in place later.
Step 4: Refill the Chlorinator
After you have unscrewed the cap, you will need to refill the chlorinator with chlorine tablets. Make sure you follow the instructions on the chlorine tablet container carefully. Don’t overfill the chlorinator as this can cause the tablets to dissolve too quickly and lead to over-chlorination of the water.
Step 5: Replace the Cap
Once you have refilled the chlorinator with the appropriate number of chlorine tablets, it’s time to replace the cap. Make sure the cap is secured tightly, so that it doesn’t come loose and spill the tablets into the pool. If your chlorinator has a latch, make sure it is securely fastened.
Step 6: Place the Chlorinator Back in the Pool
The final step is to place the chlorinator back in the pool. Make sure it is floating freely and not stuck to the side of the pool or any other object. Turn on the pool pump and let it run for a few hours to ensure the chlorine tablets dissolve properly and sanitize the water effectively.
In conclusion, opening a floating chlorinator is not a complicated process, but it does require some care and attention to detail. By following the steps outlined in this article, you can ensure that your pool water remains clean and hygienic for you and your family to enjoy.
You may also like: How Much Does It Cost To Replace A Polaris Pump?
FAQs for How Do You Open A Floating Chlorinator?
What is a floating chlorinator?
A floating chlorinator is a device used to dispense chlorine into a swimming pool or spa. It floats in the water and slowly releases chlorine tablets to maintain the sanitation of the water.
How do I open a floating chlorinator?
To open a floating chlorinator, locate the twist-lock cap at the bottom of the device. Turn the cap counterclockwise to release it and gain access to the chlorine tablets inside. Be sure to wear gloves and handle the tablets carefully to avoid skin irritation.
How often should I refill my floating chlorinator?
The frequency of refilling a floating chlorinator depends on the size of the device and the use of the pool or spa. As a general rule, refill the chlorinator when the tablets inside have dissolved by 50%. This ensures a steady supply of chlorine to the water and helps maintain proper sanitation.
Can I use other chemicals besides chlorine in a floating chlorinator?
Floating chlorinators are designed specifically for use with chlorine tablets. Using other chemicals, such as bromine, could damage the device and potentially harm swimmers. Stick to using chlorine tablets to ensure the safe and effective maintenance of your pool or spa.
Further reading: How Do You Adjust The Pressure Relief Valve On A Polaris 360?