Pool owners enjoy the luxury of relaxing in their backyard oasis during hot summer months. However, it is essential to maintain the pool to ensure that it remains safe and clean for swimmers. One of the most common issues that pool owners face is air accumulating in the pool lines. This problem can cause low water pressure and damage to the pump. Therefore, it is essential to know how to purge air from pool lines to maintain your pool’s health.
Causes of Air Accumulation in Pool Lines
Before we dive into how to purge air from pool lines, let’s understand the causes of air accumulation. Air can enter pool lines due to several reasons, such as:
- Leaks in the suction lines
- Low water level in the pool
- Power outages that cause the pump to stop
- Filter issues
How to Purge Air from Pool Lines
Purging air from pool lines is a straightforward process that pool owners can do themselves. Here are the steps to follow:
Step 1: Turn off the pump
The first step is to turn off the pool pump. You do not want to purge the air while the pump is running as it can damage the pump or the filter.
Step 2: Locate the Air Relief Valve
The next step is to locate the air relief valve on the filter. The air relief valve is usually located on top of the filter and has a small handle.
Step 3: Open the Air Relief Valve
Once you have located the air relief valve, turn the handle counterclockwise to open the valve. As you open the valve, you will hear a hissing sound as air escapes from the pool lines. Allow the valve to remain open until water starts to flow out of it.
Step 4: Close the Air Relief Valve
Once water starts flowing out of the air relief valve, close the valve by turning the handle clockwise.
Step 5: Turn on the Pump
After closing the air relief valve, turn on the pool pump. The pump will start to create a vacuum, which will help to clear any remaining air from the pool lines.
Conclusion
Air accumulation in pool lines can cause low water pressure, damage to the pump, and other pool equipment. Therefore, it is essential to know how to purge air from pool lines. By following the above steps, you can easily purge air from pool lines, ensuring that your pool remains safe and healthy for swimmers.
You may also like: How Do You Unclog A Pool Cleaner?
Frequently Asked Questions for How Do You Purge Air From Pool Lines?
What causes air to be trapped in pool lines?
Air can get trapped in pool lines due to various reasons such as improper installation, leaks, or a drop in water level. It can cause the pump to lose prime, create noise, and affect the pool’s circulation.
How do you know if there is air in pool lines?
You can tell if there is air in pool lines if the pump is running, but there is no water circulation, or if the water flow is weak. You may also hear a hissing or gurgling sound from the pool pump, which indicates there is air in the pipes.
What is the best way to purge air from pool lines?
The best way to purge air from pool lines is by using the pump’s filter setting, which can help push the air out of the lines. Start by turning off the pump, then removing the strainer basket and filling it with water. Next, turn on the pump and switch the filter valve to the waste position, then backwash for a few minutes. Finally, switch the valve to the filter position and let the pump run until the air is purged.
How often should you purge air from pool lines?
You should purge air from pool lines whenever you notice any signs of air trapped in the system. This may be caused by a drop in water level, a leak, or an improper installation. It is recommended to check your pool lines and purge the air at least once a year to ensure proper circulation and avoid damage to the pool pump.
Further reading: What Kills Algae Immediately?