If you own a Dewalt circular saw, chances are that you’ll need to change the blade at some point. Changing the blade on your Dewalt circular saw is a simple task that you can do yourself with a few simple tools. Here’s how:
Step 1: Prepare the Saw
The first step is to make sure that the saw is unplugged and that the battery is removed if you’re using a cordless saw. Next, you’ll need to retract the blade guard to expose the blade. To do this, locate the lever on the saw’s housing and push it forward. Hold the lever in place while you move the guard away from the blade.
Step 2: Remove the Old Blade
Use a wrench to loosen the bolt that holds the blade in place. Turn the bolt counterclockwise to loosen it. Once the bolt is loose, use your fingers to remove it and set it aside. Be careful not to lose it. Next, lift the old blade off the saw and set it aside.
Step 3: Install the New Blade
Before installing the new blade, make sure that it matches the specifications of your saw. Check the blade diameter and the arbor size to make sure that they match the specifications of your saw. To install the new blade, place it onto the arbor with the teeth facing forward. Make sure that the blade is seated all the way onto the arbor. Next, replace the bolt and use your wrench to tighten it clockwise. Be sure to tighten the bolt securely.
Step 4: Test the Saw
Once the new blade is installed, plug the saw back in or insert the battery if you’re using a cordless saw. Turn the saw on and let it run for a few seconds to make sure that the blade is spinning properly. If everything is working correctly, you’re ready to use your saw.
Conclusion
Changing the blade on your Dewalt circular saw is a simple task that you can do yourself with a few simple tools. By following these steps, you can ensure that your saw is always ready to tackle your next project. Just be sure to take your time and follow the instructions carefully to avoid any accidents or injuries.
Further reading: How To Do A Straight Cut With A Circular Saw?
Frequently Asked Questions about Putting a New Blade on a Dewalt Circular Saw
1. What tools do I need to change the blade on my Dewalt circular saw?
You will need a wrench and a screwdriver to change the blade on your Dewalt circular saw. The size of the wrench will depend on the model of your saw.
2. How do I remove the old blade from my Dewalt circular saw?
To remove the old blade from your Dewalt circular saw, first unplug the saw. Then use the wrench to loosen the blade bolt by turning it counterclockwise. Once the bolt is loose, remove it and the outer washer. Carefully lift the old blade out of the saw.
3. How do I install a new blade on my Dewalt circular saw?
To install a new blade on your Dewalt circular saw, first make sure the saw is unplugged. Then carefully place the new blade onto the spindle, making sure that the teeth are facing in the right direction. Replace the outer washer and blade bolt, and use the wrench to tighten the bolt by turning it clockwise.
4. How often should I change the blade on my Dewalt circular saw?
The frequency at which you should change the blade on your Dewalt circular saw will depend on how often you use it and what you use it for. As a general rule, you should change the blade when it becomes dull or damaged. This will help ensure that your saw is working efficiently and safely.
You might be interested in: Can A Beginner Use A Miter Saw?