Why Does My Polaris 360 Keep Floating?
There are a few reasons why your Polaris 360 pool cleaner may be floating instead of staying on the bottom of your pool. In this article, we will discuss some of the most common reasons and how to fix them.
1. Air in the Hose
If there is air trapped in the hose of your Polaris 360 pool cleaner, it can cause the cleaner to float. The air can enter the hose from the skimmer or the pump basket. To fix this issue, turn off your pool pump and disconnect the hose from the cleaner. Hold one end of the hose below the water level and slowly move it around to release the trapped air. Once all the air is out, reconnect the hose and turn the pump back on.
2. Dirty Filter Bag
If the filter bag in your Polaris 360 pool cleaner is full of debris or dirt, it can cause the cleaner to float. To fix this issue, turn off your pool pump and remove the filter bag from the cleaner. Empty the debris from the bag and rinse it thoroughly with a hose. Once the bag is clean, reattach it to the cleaner and turn the pump back on.
3. Broken or Loose Hose Connections
If the hose connections on your Polaris 360 pool cleaner are loose or broken, it can cause air to enter the hose and make the cleaner float. To fix this issue, turn off your pool pump and check all the hose connections. Tighten any loose connections and replace any broken ones. Once all the connections are secure, turn the pump back on.
4. Improper Hose Length
If the hose on your Polaris 360 pool cleaner is too long or too short, it can cause the cleaner to float. To fix this issue, measure the distance from your pool skimmer or dedicated suction line to the farthest point in your pool. Add two feet to this measurement and cut the hose to that length. Once the hose is the proper length, reattach it to the cleaner and turn the pump back on.
5. Broken or Worn Out Thrust Jet
If the thrust jet on your Polaris 360 pool cleaner is broken or worn out, it can cause the cleaner to float. The thrust jet is responsible for providing the necessary propulsion to keep the cleaner on the bottom of the pool. To fix this issue, turn off your pool pump and remove the cleaner from the pool. Inspect the thrust jet for any damage or wear and replace it if necessary. Once the new thrust jet is installed, reattach the cleaner to the hose and turn the pump back on.
By addressing these common issues, you can keep your Polaris 360 pool cleaner from floating and ensure it is cleaning your pool as efficiently as possible.
Further reading: How Do You Know If A Float Is Bad?
Frequently Asked Questions about Polaris 360 Floating
1. Why does my Polaris 360 keep floating?
There are several reasons why your Polaris 360 pool cleaner might keep floating. It could be due to a malfunctioning or damaged wheel or tire, a clogged filter bag, or an imbalanced water flow.
2. How can I fix my Polaris 360 from floating?
To fix your Polaris 360 from floating, you need to identify the root cause of the problem. Check your wheel and tire for any damage or wear and tear. Clean your filter bag and check for any clogs. Adjust your water flow and make sure it’s balanced. If these steps don’t work, consider replacing any damaged parts.
3. Can an imbalanced water chemistry cause Polaris 360 to float?
Yes, an imbalanced water chemistry can cause your Polaris 360 to float. High pH or alkalinity levels in your pool water can cause your cleaner to float. Therefore, it’s important to maintain proper water chemistry to avoid this problem.
4. How often should I clean my Polaris 360 to prevent floating?
You should clean your Polaris 360 regularly to prevent it from floating. Clean the filter bag after every use and check for any clogs. Inspect the wheel and tire for any damage or wear and tear. Regular maintenance can help prevent your pool cleaner from floating.
More to explore: How Do You Fix A Stuck Vacuum?