Do you have a vacuum cleaner that’s not doing its job? One of the most common problems you might encounter with your vacuum cleaner is when the brush on the vacuum isn’t spinning. Why does this happen? How can you fix it? This article will discuss all the possible reasons and solutions for your brush not spinning.
Reasons why the brush on vacuum isn’t spinning
Brush roller head is the most essential part of a vacuum cleaner since it picks up dirt, debris, and pet hair from the carpets and floors. When the brush roller isn’t spinning, it could be due to any of the following reasons:
- Clogged Brush
- The Belt is Broken
- Motor Failure
Clogged Brush
If you’ve been using your vacuum cleaner for an extended period, you might find a lot of dirt, debris, and hair wrapped around the brush roller. If it’s too much, it can stop the brush roller from spinning all together. In that case, you will need to clean the brush roller head to remove all the hair and debris from it. You can use a pair of scissors or a blade to cut and remove any tangled hair. After removing the tangles, you can easily clean out any remaining debris using a soft brush or cloth.
The Belt is Broken
In most vacuum cleaners, the motor is connected to the brush roller via a belt. If the belt is worn out, loose or broken, the brush can’t spin. The best way to check for this problem is to remove the bottom plate under the vacuum cleaner, which is located near the brush roller. The belt should be easy to spot. If you notice any damage, replace the belt with a new one, as it is an easy and inexpensive fix.
Motor Failure
If both the above options fail and your brush still isn’t spinning, the most likely problem is the motor. This is the worst-case scenario, and it might be expensive to fix or even easier to replace the vacuum cleaner entirely, but do check other possibilities before considering this option.
How to fix the brush not spinning problem in a vacuum cleaner
Once you’ve determined the cause of the problem, you can follow some of these easy tips to resolve the issue and make your vacuum cleaner work correctly again.
Unclog the Brush
To unclog the brush, use Scissors or a blade to remove any hair, debris or string wrapped around the brush roller. Next put the brush back into place carefully and test again to see if it starts spinning.
Belt repair or Replace
To fix the issue of the broken or worn-out belt, replace it with a new one. The belts are readily available in home improvement stores, local supermarkets or online stores. Purchase the right size and type of belt for your vacuum cleaner model, remove the broken one and install the new belt.
Motor issue
If the motor is the cause of the problem, you have to take the vacuum cleaner to a professional. They will be able to determine the necessary repair and whether it’s worth fixing the vacuum cleaner or replacing it entirely.
Conclusion
There are various reasons why the brush on a vacuum cleaner might not be spinning. Sometimes it’s simply a clogged brush that can easily be cleared by removing any hair or debris. Other times it might be more complicated, such as a broken belt or a faulty motor. If you follow the tips above, you can easily fix the problem and have your vacuum cleaner back in working condition.
You may also like: What Is Better Class M Or Class H Vacuum?
FAQs – Why Is The Brush On Vacuum Not Spinning?
1. How can I determine if the brush on my vacuum cleaner is not spinning?
If you see a lot of dirt and debris on the floor after you’ve already cleaned it, this could be an indication that the brush on your vacuum cleaner is not spinning. You can also check for signs of wear and tear on the brush bristles.
2. What could be causing the brush not to spin?
Several factors could cause the brush on your vacuum cleaner not to spin. These include a faulty motor, worn-out drive belt, or tangled hair and debris around the brush roll. It could also be due to an obstruction in the nozzle or a problem with the brush roll switch.
3. Can I fix the brush on my vacuum cleaner if it’s not spinning?
Yes, you can fix the brush on your vacuum cleaner if it’s not spinning. The first step is to unplug the vacuum cleaner and remove any tangles from around the brushroll. You can also clean the nozzle of any obstructions. If the issue persists, you may need to replace a worn-out drive belt, motor, or switch.
More to explore: What Is The Lifespan Of A Vacuum?